Ducati Scrambler Forum banner

1 - 20 of 20 Posts

·
Registered
Joined
·
599 Posts
Added mine over the weekend...



Very happy - nice deep tone, great build quality , awesome weight reduction.

I'm in the middle of tuning and reprogramming the fueling in the eCU now, pretty decent gains so far.
 
  • Like
Reactions: Conrad Wahren

·
Registered
Joined
·
63 Posts
Very happy to see the positive feedback in regards to the REMUS Exhaust on this forum. Just wanted everybody to know that we (REMUS USA) are a vendor on this forum. Don't hesitate to contact me if you have any questions whatsoever. Of course we do offer a discount code for forum members as well. Just a heads-up - due to the high demand we are already starting to run low on these systems. We have a handful of systems in the Stainless/Black and in the Titanium finish in stock - ready to ship!
 

·
Registered
Joined
·
63 Posts
The baffle is tig welded but very easy to break loose. I highly recommend removing the noise insert prior to installing the canister! All it takes is to remove a little set screw and then you can tap the baffle out from the other side. Once the canister is installed you don't have much leverage to pull out the baffle as it sits inside the canister pretty snug!

If it's too loud for you with the baffle removed simply slide the baffle back in place and tighten it up with the set screw.

Down to 3 units in the Stainless/Black finish! The next shipment is weeks away. Just sayin'....
 

·
Registered
Joined
·
379 Posts
Hello

@MaxMoto: as you seem to well know the Remus exhaust, can you tell me where does the catalysor KAT016 (mandatory for homologation in Europe) go ? Is it inserted in the entry of the silencer ?


I just couldn't find any information about that on european sites.
Thanks in advance
 

·
Registered
Joined
·
8 Posts
Added mine over the weekend...


Very happy - nice deep tone, great build quality , awesome weight reduction.

I'm in the middle of tuning and reprogramming the fueling in the eCU now, pretty decent gains so far.
Do you by chance plan on sharing the Re-map for us peasents who can't do it alone? only thing stopping me from buying aftermarket exhaust is the remap problem
 

·
Registered
Joined
·
599 Posts
Do you by chance plan on sharing the Re-map for us peasents who can't do it alone? only thing stopping me from buying aftermarket exhaust is the remap problem

If you go the "Rexxer" route, and have Rexxer USA reflash (or purchase a unit yourself) you will now get a copy of my mapping.


Sent from my iPad using Tapatalk
 

·
Registered
Joined
·
1 Posts
Hello, added mine yesterday. Very easy to install and sounds very good! Only did a few kms so it's not easy to talk about performance changes. My goal is to be noticed easily by car drivers, but I think it's a little too loud... :)
About the cat, are you sure it's the kat016 from Remus that we can insert in the link pipe? The dealer where I bought the exhaust says that I need the pre-silencer also to install the cat!

Thanks!
 
1 - 20 of 20 Posts
Top