Ducati Scrambler Forum banner
1 - 18 of 18 Posts

· Registered
Joined
·
49 Posts
Discussion Starter · #1 · (Edited)
Hi, I just fitted the QD slip on to my icon and I'm really pleased with it!
The choice wasn't very scientific, I wanted this look as its a bit more retro than many so at around half the price of a Termi this was a no brainer for me.
Fitting is really easy being two bolts a jubilee clip and a spring but the hanger does come off of the pillion footrest support so if you're thinking of getting rid of those then this might not be for you
It's quite loud, even by my standards, but it sounds great and really barks if you blip it to change down etc
The pipe colour isn't a match for the stock headers and the joint between the pipe and the can could be neater but other than that I've nothing to grumble about
I took it out for 30mins and couldn't really feel any difference in the performance but then I wasn't really expecting any
http://www.ducatiscramblerforum.com/forum/images/DucatiScramblerForum_2014/attach/jpg.gif
http://www.ducatiscramblerforum.com/forum/attachment.php?attachmentid=12034&stc=1&d=1435421821
 

Attachments

· Registered
Joined
·
49 Posts
Discussion Starter · #5 ·
Deluxe, clean, simple, sharp... please put an audio clip out. May go for this over SC Project Full $ystem.
I mailed SC and asked if they could supply the can from the high level system on its own because it looks a bit like mine and I wanted to mount it low. Anyway they refused so I waited and this turned up!

Whats the best way to post audio? I use a go pro most days so could post some loud commuting if I can work out how!

Pete
 

· Registered
Joined
·
519 Posts
I mailed SC and asked if they could supply the can from the high level system on its own because it looks a bit like mine and I wanted to mount it low. Anyway they refused so I waited and this turned up!

Whats the best way to post audio? I use a go pro most days so could post some loud commuting if I can work out how!

Pete
Well done Pete it looks fab, Looking forwards to hearing it.

Be safe.

Will
 

· Registered
Joined
·
323 Posts
Just ordered on Ebay, best value exhaust including a CAT that I have found upto now and I think it somehow looks so much better than the short exhausts.

As its polished Steel I will probably get it Powder Coated but leave the Endcap silver.
 

· Registered
Joined
·
323 Posts
Exhaust arrived, fitted and tested. My wife said it sounds quite a bit louder than stock, one aquaintance thought something a lot bigger was arriving!!!!

Its fitted with a CAT so no retune needed, all popping is now gone, even that which was happening with the stock exhaust on deceleration and performance doesnt seem to be affected in any way.

All in all quite pleased with sound and looks.
 

Attachments

1 - 18 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top