[Hedonism]

well, my Urban Enduro should be delivered in March.... in the meantime I'm "shopping" for the new baby, this is my lilst and is status:


- Zumo 660/BMW Nav. V GPS mount by Touratech Euro 10

will fit to handlebar bracket


- Zumo 660/BMW Nav V GPS power cradle by Garmin Euro 60 (Amazon)

- Folding Mirror (2) by Touratech Euro 26 each

- Seat bag Kriega Dry Bag US20 by Twalcom Euro 90

- Tool Roll Kriega by Twalcom Euro 26

- Forks seals Kriega by Twalcom Euro 23

all above already ordered,


still to be ordered

- Continental TKC 80

- Hands guards (will need the bike to try they will fit)

Acerbis - Rally 3

or

Racetech Gladiator Alu

I'll probably buy the official Tank Bag, need to "touch" it before.

will revert

 

[Hedonism]

I forgot the Off Road foot rests

-

 

[TC3]

Your Kriega us20 will not fit on the rear seat without over hanging a lot. My us10 wont fit but my us5 does

 

[Hedonism]

ops....I thought to mount perpendicular to the saddle in such a way it will overhang by the sides

 

[TC3]

Could try as the buckles are flexible enough to twist and face the side. I do not like the new style Kriega straps that now come with the bags which you are suppose to mount to the frame and much prefer the older straps that you can just pass under the seat and have nothing hanging of the frame

 

[Hedonism]

this is their description, I understand it will be fixed "underseat"

The US-20 tailpack is designed to fit most race-rep style seat pads (attachment straps included). The pack is easily attached/removed by 4 x quick-release buckles. Remove the 2 x compession straps from the US-20. Remove the bike's seat pad. Lay the straps in to the void of the rear seat. Replace the seat pad and ensure it is correctly locked down (thread the top roll-over strap through the pillion grab-strap if present). Finally, connect all 4 x quick-release buckles and tighten the pack down on to the seat.

 

[TC3]

Yep that is the old style ... do you have a link of where you seen that text? Far as I know they dont sell those style straps anymore with the us bags

 

[Mixup]

well, my Urban Enduro should be delivered in March.... in the meantime I'm "shopping" for the new baby, this is my lilst and is status:


- Zumo 660/BMW Nav. V GPS mount by Touratech Euro 10

will fit to handlebar bracket


- Zumo 660/BMW Nav V GPS power cradle by Garmin Euro 60 (Amazon)

- Folding Mirror (2) by Touratech Euro 26 each

- Seat bag Kriega Dry Bag US20 by Twalcom Euro 90

- Tool Roll Kriega by Twalcom Euro 26

- Forks seals Kriega by Twalcom Euro 23

all above already ordered,


still to be ordered

- Continental TKC 80

- Hands guards (will need the bike to try they will fit)

Acerbis - Rally 3

or

Racetech Gladiator Alu

I'll probably buy the official Tank Bag, need to "touch" it before.

will revert

You will not need the Tool Roll Kriega because it will not break down cus its Italian and a Ducati!!!

 

[Hedonism]

I always carry tool, tape, ironrope, and small wd40

 

[Hedonism]

Yep that is the old style ... do you have a link of where you seen that text? Far as I know they dont sell those style straps anymore with the us bags

TT® Twalcom

seleect language than "shop"

on the left you'll find "kriega" menu ----> Dry Bags US System

 

[TC3]

Being Italian any language would do

Ok so they are the new type and those straps need to be attached to the frame under seat or the seat but i can not remember if there are bars under either to attach to

 

[Hedonism]

I think the straps will only make loop of the seat, without being attached to the frame under it....

 

[Hedonism]

both work

 

[Hedonism]

another piece added:

Splinde Sliders

need them to put bike on box stand

 

[Hedonism]

order of these has been cancelled since despite as shown on RG racing webshop, items was on "back order". just ordered from Shift Tech Carbon, that are, presently, the only one I found available; they do both rear stand and slider protection.

 

[Hedonism]

High termignoni exhaust is on!!

I love it, and Db killer is still on..... (waiting it will be cooler )

waiting for dad to the dealer (he washed )

at home

and singing

https://fgrammatico.smugmug.com/Moto/Scrambler/i-P3FwMsX

 

[Don_D]

Looks great!

Where did you find that front number plate? It looks really good.

 

[Hedonism]

front plate is "home made", I bought it on ebay uk and used the OEM windshield frame to fit