Horn - Fit? PIAA Sports Horn Install

Icon by the way - didn't think it would matter as clearance is the same it looks like.

Tried a couple horns as there is not much space in there because of the plastic cover in the front and side.

Only the PIAA "Slim Line Sports Horn" #76501 would fit so I could still fasten the 3 star nut bolts to secure the cover. The key was bending the bracket at a right angle as close to the center as possible, with the label pointing down. There is no other way this horn would work unless the bracket was a bit longer.

The Black wire is the (+), attached it to the connector on the horn closest to the bracket. Purple goes below it.

Good luck. Yeah - can't see either of those horns fitting unless you're willing to cut some of the black plastic cover away. They might work then, but I wasn't keen on cutting...

Attach to orig bracket

keiyo said:

I'm looking at the second pic - where are you fastening the horn's metal attachment piece to the bike? Are you connecting the horn to that silver metal part that secures the stock horn?

Click to expand...

---> Attach the horn to the original mount on the bike.