Ducati Scrambler Forum banner

Aftermarket handlebar cross brace

4339 Views 3 Replies 2 Participants Last post by  silverluxe
Does anyone know the specs for adding a handlebar cross-brace to (any of) the Scramblers?

The EOM one is, as usual, a rip off and I'd want one in black anyway:

Genuine Ducati Scrambler Handlebar Cross Brace 96280191A | eBay

Figure this is a generic part and they have been around for all kinds of bikes for a while. Curious if anyone here has fitted one and if you could post link to where to buy with specs.

Thanks in advance!
1 - 2 of 4 Posts
Any 7/8" (22mm) cross brace that's the right length should work. What do you have in mind though? Renthal ones cost more than the OEM in this case.
Ahh, yeah, the Full Throttle bars are tapered, so I have no idea what fits. The cross brace from Ducati for the silver bars probably does not fit, but don't quote me on that. The point of taper bars is that you don't need the cross brace to strengthen them from bending in a crash.
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.